Canon 700 Series User Manual
Page 254
Setting Up the Program One-Touch Key
10-17
Other Special F
eatures
10
An asterisk (*) indicates the default setting.
9
When you are finished setting up the program one-touch key,
press [Stop] to return to the Standby mode.
RELAY
Sets the one-touch speed dialing key to substitute for the procedure of
opening all three one-touch speed dialing panels, pressing [Advanced
Communication], and selecting
use the Relay Transmission feature, press the one-touch speed dialing
key set for this feature.
POLLING
Sets the one-touch speed dialing key to substitute for the procedure of
opening all three one-touch speed dialing panels, pressing [Advanced
Communication], and selecting
use the Polling feature, press the one-touch speed dialing key set for
this feature.
ACCESS CODE
Press to use access code dialing.
SENDER’S
NAME SET
You can register a sender’s name in a program one-touch key.
SET TEXT
Press to enter fixed text, such as a domain name of e-mail address.
MEMORY
REFERENCE
Sets the one-touch speed dialing key to function as [Memory
Reference]. Whenever you want to check or delete the documents
stored in memory, press the one-touch speed dialing key set for this
feature.
PIN CODE
Sets the one-touch speed dialing key to function as [Pin Code].
Whenever you want to enter the PIN code to connect to an outside line,
press the one-touch speed dialing key set for this feature.
STAMP
If you have the optional stamp feature installed, you can turn the stamp
feature ‘ON’ and ‘OFF’ without opening all three one-touch speed
dialing panels and pressing [Stamp].
ID CODE
Sets a one-touch speed dialing key to function as [ID]. If you are using
Department ID Management, press the one-touch speed dialing key set
for this function when your operations are completed, or when you want
to enter a Department ID to switch the department. Otherwise, any
subsequent transmissions and copies are totaled under the
Department ID you previously entered to start operating the machine.
Setting
Description
Stop