Canon 700 Series User Manual
Page 158
Setting Up and Using a Standard Relay Unit
6-5
6
Using a Rela
y Netw
or
k
The SETUP FILE menu includes the following items:
Setting
Description
1.GROUP DIAL NAME
Name (24 characters)
Enter a name for the relay group. The name can be up to 24
characters long. Then, press [Set].
2.PASSWORD
0-9999999
Enter a password (up to seven digits) to protect the relay box settings
you are about to set up. After you set a password, you will have to
enter it every time you want to view or change these settings. Enter a
password, and press [Set].
3.TRIGGER
1.SUBADDRESS
This is the ITU-T subaddress. Enter a number up to 20 digits long (it
can include spaces and the symbols and #). The OPTIONAL
SETTINGS for the speed dialing key or code under which the
originator fax machine's telephone number is registered must be set to
‘OFF’.
2.SENDER’S FAX NO.
Enter the sender’s telephone number using one-touch or coded speed
dialing.
3.MAIL ADDRESS(To)
See the Sending Guide.
For the LASER CLASS 710, the installation of the optional Network Kit
III is necessary to access these items.
4.RX PASSWORD
20 digits ( , #, spaces)
If your machine is the relay unit, this ITU-T password must match the
ITU-T password of the document sent from the originator in order for
your machine to receive the document. Otherwise, your machine will
not receive the document. Enter a number up to 20 digits long (it can
include spaces and the symbols and #).
5.SELECT ORIG UNIT
If your machine is the relay unit, this feature forces your machine to
check the identity of the originator before it receives the document,
and relays it to other fax machines.
ON
If your machine receives a document for relay, it will check the identity
of the originator before it receives the document. In order for this
feature to perform correctly, the telephone number of the originator
unit must be registered for speed dialing on your machine.
TEL =
Press the one-touch speed dialing key, or press [Coded Dial] followed
by the three digit code where the number for the originator machine is
registered
➞ press [Set].
OFF*
Your machine will receive a document for relay without checking the
identity of the originator.
6.PRINT RX DOC.
If your machine is the relay unit, this setting determines if your
machine prints a copy of every document that it relays.