Canon 700 Series - Manual (Page 159)

Setting Up and Using a Standard Relay Unit 6-6
Using a Rela
y Netw
or
k
6
An asterisk (*) indicates the default setting.
OFF* Your machine will not print a copy of every document it relays to other
fax machines.
ON Your machine prints a copy of every document it relays to other fax
machines.
# OF RX COPIES If you turn PRINT RX DOC. ‘ON’, use this setting to specify the
number of copies you want to print (01 to 99).
Default setting: ‘01COPIES’*
7.SELECT LOCATIONS This item enables you to select the machines to receive the document
your machine relays. The number of machines to receive the
document must be registered for one-touch or coded speed dialing.
You cannot enter a number with regular dialing.
TEL = Close the one-touch speed dialing panels, and press the speed dialing
keys where the numbers of the machines to receive the relay
broadcast are registered, then press [Set]. You can select up to 200
destinations.
8.TX REPORT This feature determines if your machine returns a relay transmission
report to the originator after your machine receives and relays a
document.
TRANSMIT* After your machine relays a document, it sends a transmission report
back to the originator. In order for this feature to perform correctly, the
originator’s telephone number must be registered on your machine for
one-touch or coded speed dialing, which must be set in <5.SELECT
ORIG UNIT>.
NOT TRANSMIT No relay transmission report is sent to the originator after a document
has been relayed.
9.TX START TIME You can set your machine to hold documents, and then relay them at a
preset time. If you do not set this item, all documents received for relay
are relayed immediately. If you want to use this feature, press [Set].
Use the numeric keys to enter the time in 24-hour notation. You can
set up to five times to relay documents within a 24-hour period
everyday.
10.RELAY B’CAST This feature switches relay broadcasting for this group ‘ON’ and ‘OFF’
without altering any of the other settings.
ON* Your machine receives and relays a document set for relay
broadcasting.
OFF Your machine will not receive or relay a document set for relay
broadcasting.
Setting Description