Canon 700 Series - Manual (Page 354)

Glossary 14-17
Appendix
14
• Activity Management Report (TX or RX): You can set the machine to print a report
every time you send or receive a document. You can also set the machine to print
part of the document on the report to remind you of the content of the document. To
turn printing these activity reports ON and OFF, use the User Settings.
• Activity Report: Provides a record of the last 40 sending and receiving transactions.
You can print out Activity Management Reports manually whenever you want to
review the last 40 transactions, set the machine up to print them automatically after
every 40 transactions, print the report at the same time everyday, or print the report
showing the sending transactions of individuals or departments in your company,
using department codes registered in the machine, as well as a list of receptions.
• Confidential RX Report: After you receive a confidential document in a mailbox, the
machine prints out a confidential message notice. No special settings are required.
Each notice shows the date and time you received the confidential document, the
name and telephone number of the party sending the confidential document,
whether the document was successfully received, and other useful information.
• Error TX Report: If the machine fails to send a document because the other party
did not answer, even after automatic redialing, or if an error occurs, then your
machine immediately prints an Error Transmission Report. The report includes the
facsimile number of the other party so you can try sending again, and can print part
of the first page of the document so you can identify it.
• Memory Clear Report: When documents are stored in the memory if power to the
machine is cut OFF for more than 12 hours, the documents stored in memory are
erased. After power is restored, a Memory Clear List prints to show you which
documents have been erased. If power is restored within 12 hours, the documents
are not erased, and no report prints.
• Multi TX/RX Report: When you send a document to more than one destination, the
machine prints a report to show you the names and numbers of the other parties,
whether the transactions were completed, and if any errors occurred. The machine
automatically prints multitransaction reports for sending documents to more than
one destination, delayed sending documents to more than one destination, sending
documents through a relay fax to more than one destination, and sending
confidential documents to more than one destination if the mailboxes are the same
on every fax machine.
• Relay Broadcast Report: After sending a document through a relay fax, you may
receive a Relay Broadcast Report from the fax machine that relayed the document.
This shows whether the document was successfully relayed to all the destinations.
To receive a report, the other machine must be set to print a Relay Broadcast
Report.
Resolution
The density of dots for an output device like a fax, scanner, or printer. Expressed in
terms of dots per inch (dpi). Low resolution causes font characters and graphics to
have a jagged appearance. Higher resolution means smoother curves and angles, as
well as a better match to traditional typeface designs. Resolution values are
represented by horizontal data and vertical data, for example, 600 dpi x 600 dpi.