Canon 700 Series - Manual (Page 217)

Using Memory Lock 9-12
9
Special Sending/Receiving F
eatures
An asterisk (*) indicates the default setting.
8
Press [Stop] to return to the Standby mode.
2.REPORT
OUTPUT NO*
OUTPUT YES
Sets the machine to print reports. This setting affects
only reports that print automatically, such as activity
reports for sending and receiving, and Activity
Management Reports.
No report prints while in the Memory Lock mode.
A report prints while the machine is in the Memory
Lock mode.
3.TIME SETUP
OFF*
ON
1. START TIME
EVERYDAY*
SELECT DAYS
2. END TIME
EVERYDAY*
SELECT DAYS
Sets the time for the machine to enter and leave the
Memory Lock mode. The timer settings are optional.
If you do not set the time, you can use [Memory
Reception] to turn the Memory Lock mode ‘ON’ or
‘OFF’.
Turns ‘OFF’ the timer setup. You can turn the
Memory Lock mode ‘ON’ or ‘OFF’ with [Memory
Reception].
Turns ‘ON’ the timer setup. You can still use [Memory
Reception] to turn the Memory Lock mode ‘ON’ or
‘OFF’.
Sets the time for the machine to automatically enter
the Memory Lock mode.
Set the time using 24-hour notation. Up to five start
times can be specified for everyday or each selected
day.
Sets the time for the machine to leave the Memory
Lock mode.
Set the time using 24-hour notation. Up to five end
times can be specified for everyday or each selected
day.
Setting Description
Stop