Canon 700 Series User Manual
Page 118
Overview of Sending Methods
3-21
3
Sending Documents
NOTE
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
➞ enter the correct digit.
• You can also use
(Clear) to clear the entire telephone number
➞ begin
entering the telephone number again.
• If you notice that you made a mistake while the machine is dialing the number,
press
(Stop) to return to the Standby mode ➞ start again.
4
When you hear the other party answer the call, pick up the
handset and talk.
If you hear a high pitched tone, instead of the other party’s voice, the machine is
ready to receive your document. Proceed to step 6.
5
Ask the other party to press the start key on their fax
machine, then hang up their handset.
After the other party presses the start key on their fax machine, you will hear a
high pitched tone.
6
Press [Start] on your machine
➞ hang up your handset.
Sending starts.
IMPORTANT
If the off hook alarm starts beeping, make sure the handset is resting properly on
the handset cradle. The volume of the off hook alarm can be adjusted. (See “User
Settings,” on p. 11-5.)
C
Start