Canon 700 Series - Manual (Page 167)

Sending a Document to a Relay Unit for Relay Broadcasting 6-14
Using a Rela
y Netw
or
k
6
6
If an ITU-T password is required to start the relay broadcast,
press [Password].
Otherwise, proceed to step 8.
NOTE
You must press [Password] within five seconds of pressing
(Set) in step 5. If
you wait longer than the timeout interval before pressing [Password], the machine
starts scanning the document. The timeout interval can be turned ‘OFF’. (See “TX
(Send) Settings,” on p. 11-14.)
\
7
Enter the ITU-T password (up to 20 digits, including , #, and
spaces) set on the other party’s machine using the numeric
keys
➞ press [Set].
NOTE
You must enter the correct password, including , #, and spaces, set on the other
party’s machine. Otherwise, the other party’s machine cannot receive the
document.
8
Press [Start].
The machine starts the transmission.
NOTE
The machine begins scanning the documents automatically if the Timeout feature
is set to ‘ON’. (See “TX (Send) Settings,” on p. 11-14.)
Password
Set
Set
4
1
7
5
2
8
6
3
9
0
Start