Canon 700 Series User Manual
Page 325
List of LCD Display Messages (Alphabetical List)
13-10
T
roub
leshooting
13
MEMORY FULL
Cause
The memory is full.
Remedy 1 If the document has been received in memory, print the document. (See
“Printing a Document in Memory,” on p. 9-18.)
Remedy 2 If documents have been received in confidential mailboxes, print them. (See
“Receiving a Confidential Document,” on p. 7-10.)
Remedy 3 Check the contents of the memory. If there are unnecessary documents stored
in memory, delete them. (See “Erasing a Document from Memory,” on p. 9-22.)
Remedy 4 If you tried to send a document with the ‘Ultra Fine’, ‘Super Fine’, or ‘Text/Photo’
document setting, try using the Direct Sending method, or set the resolution to
‘Fine’ or ‘Text’, and send the document using Memory Sending.
MEMORY FULL PLEASE WAIT
Cause
The memory is full.
Remedy
Wait until the current document transmission is completed. Try sending your
document again when the current transmission is complete.
NO DOC. STORED
Cause
You tried to check the contents of the memory, but no documents are currently
stored in memory.
Remedy
Store documents if necessary.
NOT AVAILABLE NOW
Cause 1
You pressed a one-touch speed dialing or [Coded Dial] followed by a three digit
code that is not registered for the feature you are trying to use.
Remedy
Try again without using the feature, or assign the feature to the one-touch speed
dialing key or coded speed dialing code.
Cause 2
When using Manual Sending, you pressed a one-touch speed dialing key or
coded speed dialing code under which a group for group dialing has been
registered.
Remedy
Try sending your document with a one-touch speed dialing key or coded speed
dialing code under which a group is not registered.