Canon 700 Series User Manual
Page 293
System Settings
11-30
Summar
y
of Impor
tant Settings
11
5
Press [
▼
] or [
▲
] to display the item you want to set or change
➞ press [Set].
For more information on the available System Settings, see the table below.
6
Press [Stop] to return to the Standby mode.
Setting Item
Description
SYSTEM SETTINGS PASSWORD
1. MEMORY LOCK RX
OFF*
ON
1.MEM LOCK PASSWORD
2.REPORT
OUTPUT NO*
OUTPUT YES
Enter the system settings password protecting the system settings.
(You do not need to do this if the system settings are not yet
password protected.)
Turn forced memory receiving ‘ON’ and ‘OFF’. (See “Using Memory
Lock,” on p. 9-10.)
Memory receiving operation is turned ‘OFF’.
Memory receiving operation is turned ‘ON’.
0-9999999
Enter a password (up to seven digits) to protect the memory lock
settings.
Sets the machine to print reports when the forced memory receiving
feature is ‘ON’.
Reports are not printed when the forced memory receiving feature is
‘ON’.
Reports are printed when the forced memory receiving feature is
‘ON’.
An asterisk (*) indicates the default setting.
Set
Stop