Canon 700 Series User Manual
Page 326
List of LCD Display Messages (Alphabetical List)
13-11
T
roub
leshooting
13
NOT FOUND, TRY AGAIN
Cause
The box number you specified does not exist or has not been set up.
Remedy
Try entering a different box number.
NOT REGISTERED
Cause
You pressed a one-touch speed dialing key or [Coded Dial] followed by a three
digit code, but no telephone number is registered.
Remedy 1 If you have forgotten where the desired telephone number is registered, use
directory dialing. (See “Using Directory Dialing,” on p. 2-39.)
Remedy 2 You can also print a list of all numbers registered for speed dialing. (See
“Printing the Speed Dialing Lists,” on p. 12-2.)
OUTPUT TRAY FULL
Cause
The output tray is full of paper.
Remedy
Pick up the printed pages in the tray.
PRINT LIMIT REACHED
Cause
Printing has been restricted.
Remedy
Set RESTRICT PRINTING from the DEPT. ID MANAGEMNT menu to ‘OFF’.
(See Chapter 4, “Restricting the Use of the Machine,” in the Reference Guide.)
PRT ALT. PAPER SIZE? YES=( ) NO=(#)
Cause
The size of the available recording paper loaded in a paper cassette does not
match the size of the document waiting to be printed.
Remedy
If you do not mind printing the document on a different paper size, press [ ]. If
you want to print on the correct paper size, press [Stop]
➞ load the correct size
paper
➞ press [Start].
REC. PAPER JAM
Cause
Paper has jammed in the paper cassette or inside the printer.
Remedy
Clear the paper jam. After clearing the jammed paper, open and close the
printer cover to reset the printer. (See Chapter 7, “Troubleshooting,” in the
Reference Guide.)