Canon 700 Series - Manual (Page 162)

Setting Up and Using a Standard Relay Unit 6-9
6
Using a Rela
y Netw
or
k
Deleting the Relay Group
Follow this procedure to delete the relay group and all of its settings.
1
Open all three one-touch speed dialing panels
➞ press [Data
Registration]
➞ [▼] or [▲] until <3.FAX SETTINGS> appears ➞
press [Set].
If necessary, see steps 1 to 3 of “Setting Your Machine as a Relay Unit,” on p.
6-3.
2
Press [
▼] or [▲] until <6.FILE SETTINGS> appears ➞ press
[Set]
➞ [▼] or [▲] until <2.RELAY TX GROUP> appears ➞
press [Set].
If necessary, see steps 4 and 5 of “Setting Your Machine as a Relay Unit,” on p.
6-3.
3
Press [
▼] or [▲] until <3.DELETE FILE> appears ➞ press
[Set].
4
Enter the two digit relay group number that you want to delete
using the numeric keys
➞ press [Set].
You can also press [
▼] or [▲] to select a relay group number.
The prompt will be displayed if you have previously set a
password. Proceed to step 5. Otherwise, proceed to step 6.
➞
➞
Set
Data
Registration
Set
Set
4
1
7
5
2
8
6
3
9
0
Set