Canon 700 Series - Manual (Page 115)

Overview of Sending Methods 3-18
3
Sending Documents
Direct Sending
The machine dials the number, connects the call, and then scans and sends the
document one page at a time. Direct Sending is slower than Memory Sending, but
because this method bypasses the memory, you can send a document ahead of
other documents stored in memory.
NOTE
• Direct Sending scans and sends each page one at a time.
• With Direct Sending, you can watch each page as it is scanned and sent.
• Although Direct Sending is slower than Memory Sending, you can use Direct Sending if
you need to send an urgent document ahead of other documents stored in memory.
• You can also use Direct Sending when the memory is full, and there is no space to hold
another document in memory.
1
Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine,” on p. 3-3.
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See
“Adjusting the Scan Settings,” on p. 3-4.)
• You can also specify a sender’s name with [TTI Selector]. (See “Selecting a
Sender’s Name,” on p. 3-6.)
2
Press [Direct TX].
The Direct TX indicator lights.
The Direct Sending mode is activated.
SEND
Direct TX