Canon QT5-0849-V03 - Manual

Start Here
Easy Setup Instructions
Start Here
Easy Setup Instructions
Unpack the Machine
QT5-0849-V03
a Open the Printer Cover and remove the protective materials.
Note
The actual protective materials may differ in shape, quantity, and position from the ones
shown in the illustration above.
b Connect the Handset to the jack, and place it in its cradle.
There is a groove
on the bottom of the
machine to hold the
handset cord.
c Connect the telephone line and any necessary external device.
For more details, see “Step 5” on the back of this sheet.
Connect the telephone
line cord to the wall jack.
You can connect
an external device
(telephone or answering
machine) if necessary.
Important
Be sure to use supplied telephone line cable.
d Plug the power cord into the back of the machine and connect
the other end to a power outlet.
1
Prepare the Machine
a Lift the Printer Cover until it locks into place.
b When the Printer Cover is opened, the Cartridge Holder will
move to the left.
c Prepare the FINE Cartridge.
Remove the
FINE Cartridge
from its package.
Remove the protective tape.
When doing so, DO NOT TOUCH
the metallic areas.
DO NO TOUCH.
e Press [ON/OFF].
Press [Start/Copy].
f Use [{] or [}] on the Operation Panel to select the language
for the LCD, then press [Start/Copy].
Press [{] or [}] to select the language.
Press [Start/Copy].
2
Install the FINE Cartridge
d Insert the FINE Cartridge slightly slanted into the Cartridge
Holder.
e Push up the FINE Cartridge until it clicks into place.
DO NOT put the head of the FINE Cartridge downward
into the Cartridge Holder.
f Close the Printer Cover.
Wait until the preparation
operation is completed: this takes
about one to two minutes.
• Please confirm the included items against the illustration printed on the lid of the packing box.
Turn Over
For the instructions for Loading Paper,
Setting RECEIVE Mode, Connecting the
Machine, and Replacing the Cartridge.
Important
When cleaning the exterior of the machine, use a soft cloth to wipe it gently. For details, refer to “ Cleaning Your Machine” in the User’s Guide.