Canon 700 Series - Manual (Page 121)

Redialing When the Line Is Busy 3-24
3
Sending Documents
6
Press [ ▼ ] or [ ▲ ] to display
➞ press [Set].
If you select ‘OFF’, proceed to step 8. In this case, redialing is not attempted after
the first dialing attempt fails.
7
Press [ ▼ ] or [ ▲ ] to display the desired Auto Redial setting
➞
press [Set].
The AUTO REDIAL menu includes the following items:
An asterisk (*) indicates the default setting.
➞
Setting Description
1. REDIAL TIMES Sets the number of times the machine attempts to dial a
number before it cancels the transaction automatically.
Even if the machine is set to redial several times, it will redial
only once if there is no dial tone or ring back tone during the first
attempt.
You can set the machine to redial between 01 to 10 times.
(Default setting: ‘02TIMES’*)
2. REDIAL INTERVAL Sets the length of time the machine waits between redialing
attempts.
You can set the time interval between 02 to 99 minutes.
(Default setting: ‘02MIN’.*)
3. TX ERROR RESEND
ON*
ERROR & 1ST
PAGE*
ERROR PAGE
ALL PAGES
OFF
Selects whether to perform automatic redialing when a
transmission error occurs.
The machine automatically redials the number after a
transmission error occurs, and enables you to customize the
redial operation.
The machine redials the number and resends the document
from the page where the error occurred, as well as the first
page of the document.
The machine redials the number and resends the failed pages
only.
The machine redials the number and resends all pages of the
document.
The machine does not automatically redial the number after a
transmission error occurs.
Set
Set