Canon 700 Series - Manual (Page 34)

Using the Menus and Operation Panel Keys 1-13
Bef
ore
Y
ou Star
t Using
This Machine
1
Entering Names for Registration
When you come to a step that requires entering a name for data registration, follow
the procedure below.
In a display that requires a name entry, the letter or number in the upper right
corner of the LCD display tells you the entry mode.
1
Press [ ] to change the entry mode.
NOTE
The numeric keys are clearly labeled with one number and some letters.
2
Press the appropriate key on the numeric keypad to enter a
letter or number.
If Text is the chosen entry mode, press the key repeatedly until the upper or lower
case letter you want appears.
If you go past the letter you want, press the key repeatedly until it appears again.
NOTE
Each key contains the upper and lower case letters for its group of letters.
(For example:
contains the letters ABCabc)
3
Enter the next letter, if necessary.
If the next letter you want to enter is under the same key you just pressed, press
[ ] to move the cursor to the right one space. Then, press the key repeatedly
until the letter you want appears.
If the next letter you want to enter is under a different key, just press that key to
move the cursor to the right, and enter the first letter of that group.
Display Entry Mode What It Does
:A Text Enables you to enter upper and lower case letters.
You can also press [#] to enter a symbol.
:1 Number Enables you to enter numbers.
4
1
7
5
2
8
6
3
9
0
2
▲