Canon 700 Series - Manual (Page 288)

File Settings 11-25
Summar
y
of Impor
tant Settings
11
Setting Item Description
8.TX REPORT
TRANSMIT*
NOT TRANSMIT
Sends a TX report from your machine (the relay unit) to the
originator of the transmission.
Transmits a document relay report to the originator.
No report is transmitted to the originator.
9.TX START TIME
10.RELAY B’CAST
ON*
OFF
Sets the machine to hold the document from the originator, and
then relay it at a specified time. Use 24-hour notation to set up to
five times for transmission.
Turns ‘ON’ and ‘OFF’ relay broadcasting temporarily.
In order for relay broadcasting to occur, this setting must be ‘ON’.
Turns relay broadcasting OFF temporarily without canceling or
changing the relay box settings.
2. CHANGE DATA
SET RLY GROUP TX#
PASSWORD
3. DELETE FILE
SET RLY TX GROUP#
PASSWORD
3. PRESET POLLING
1. SETUP FILE
SET BOX #
1.FILE NAME
2.PASSWORD
3.SELECT LOCATIONS
TEL=
Change or add settings to the relay box.
Enter the number of the relay box you want to change.
Enter the password protecting the relay box settings.
You can now change any of the settings listed above in
1.SETUP FILE.
Delete a relay box and all of its settings.
Enter the number of the relay box you want to delete.
Enter the password of the relay box you want to delete.
Sets up preset polling sending/receiving settings. (See “Polling
to Receive at a Preset Time,” on p. 8-5.)
Sets up a preset polling box.
00-99
Create a two digit preset polling box number.
Enter a name for the preset polling box (up to 24 characters).
0-9999999
Enter a password (up to seven digits) to protect the preset
polling box settings.
Select the numbers of the fax machines you want to poll.
Use one-touch or coded speed dialing to specify the numbers
of the fax machines you want to poll.