Canon 700 Series - Manual (Page 232)

TX Document Archiving 9-27
9
Special Sending/Receiving F
eatures
5
Press [ ▼ ] or [ ▲ ] until <6. TX DOC. ARCHIVING> appears
➞
press [Set].
6
Press [ ▼ ] or [ ▲ ] to select
➞ press [Set].
7
Press [Stop] to return to the Standby mode.
The TX Document Archiving is set to ‘ON’, and the machine returns to the
Standby mode.
In order to use the TX Document Archiving, you must turn the Transfer mode
‘ON’. (See “Turning the Transfer Mode ON and OFF,” on p. 9-6.)
NOTE
• TX Document Archiving will be performed once for each document transmitted.
Regarding the redialing, it works based on the settings of this machine. (See
“Setting Up Redialing,” on p. 3-23.)
• When using sequential broadcasting, after all transmissions (including redialing or
error redialing) finish, if there is at least one destination to which all pages were
sent successfully, then TX Document Archiving will be performed once.
• In the Activity Management Report, regarding the Mode field (Transaction Mode),
"TRANSFER" will be printed and regarding the NO. field (Transaction Number), the
number of the original sending destination will be printed.
• Regarding the DATE and TIME of the TX Document Archiving on the sender
information, the DATE and TIME that the TX Document Archiving was performed
will be printed.
➞
➞
➞
Set
Set
Stop