Canon 700 Series - Manual (Page 60)

Read This Before Entering Telephone Numbers 2-3
2
Using Speed Dialing
NOTE
Keep in mind these important points about pauses:
- A pause entered within a number (p) is two seconds long.
- You can add consecutive pauses (pp) by pressing [Redial/Pause]. Each additional
pause adds two seconds to the pause time.
- You can change the length of a pause entered within a number. (See “Adjusting
the Length of a Pause,” on p. 2-3.)
- A pause at the end of a number (P) is 10 seconds long.
- You may have to insert one or more pauses at the end of a number to dial an
overseas number.
- You cannot insert a pause when you dial using the numeric keys after pressing
(Hook), or after picking up the handset.
Adjusting the Length of a Pause
Follow this procedure to adjust the length of a pause entered within a number.
NOTE
This procedure is effective only for adjusting the length of pauses entered within
telephone numbers. The 10 seconds pause entered at the end of a number cannot be
adjusted.
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
3
Press [ ▼ ] or [ ▲ ] until <3.FAX SETTINGS> appears
➞ press
[Set].
4
Press [ ▼ ] or [ ▲ ] until <3.TX SETTINGS> appears
➞ press [Set].
➞
➞
Data
Registration
Set
Set