Canon 700 Series - Manual (Page 59)

Read This Before Entering Telephone Numbers 2-2
Using Speed Dialing
2
Read This Before Entering Telephone Numbers
Read this section before you register numbers for speed dialing, especially if your
site has special dialing requirements, such as dialing through a PBX (Private
Branch Exchange).
Entering Pauses for Dialing
If your machine is connected to a switchboard or PBX, you may have to dial a
number to connect to an outside line. The outside number must also be registered
with the fax number. The switching system may also require that you insert a pause
after the outside number. For further assistance, contact your local authorized
Canon dealer, or your local telephone company.
Follow this procedure to enter a pause during regular dialing or when registering a
number for a speed dialing key.
1
When you come to a step that asks you to enter a number for
dialing, use the numeric keys to enter the number.
2
To enter a pause between two numbers, press [Redial/Pause].
After you enter the next number, the uppercase
changes to a lowercase
.
3
To enter a pause at the end of a number, press [Redial/Pause]
➞ [Set].
The pause at the end of a number appears as an uppercase
.
4
1
7
5
2
8
6
3
9
0
Redial
/ Pause
Redial
/ Pause
Set