Canon 700 Series User Manual
Page 187
Polling Other Fax Machines to Receive a Document
8-4
8
Using P
olling
NOTE
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
➞ enter the correct digit.
• You can also use
(Clear) to clear the entire telephone number
➞ enter the
telephone number again.
• If you notice that you made a mistake while the machine is dialing the number,
press
(Stop) to return to the Standby mode ➞ start again.
• You can also select a sender’s name with [TTI Selector]. (See “Selecting a
5
If you want to receive a document from a fax machine that has
set an ITU-T subaddress, press [Set]
➞ [Subaddress].
If you want to receive a document from a fax machine which does not have an
ITU-T subaddress/password set, proceed to step 9.
NOTE
You must press [Subaddress] within five seconds of pressing
(Set). If you wait
longer than the timeout interval before pressing [Subaddress], the machine starts
dialing the number. The timeout interval can be turned ‘OFF’. (See “TX (Send)
Settings,” on p. 11-14.)
6
Enter the ITU-T subaddress using the numeric keys
➞ press
[Set].
NOTE
You must enter the correct subaddress, including , #, and spaces, set on the
other party’s machine. Otherwise, your machine cannot start polling.
7
If an ITU-T password is required, press [Password].
Otherwise, proceed to step 9.
➞
➞
C
Set
Subaddress
Set
4
1
7
5
2
8
6
3
9
0
Set
Password