Canon 700 Series User Manual
Page 271
User Settings
11-8
Summar
y
of Impor
tant Settings
11
Setting Item
Description
2.I-FAX
ON*
1.TTI POSITION
OUTSIDE IMAGE*
INSIDE IMAGE
2.TEL NUMBER MARK
FAX
*
TEL
OFF
5. SENDER FAX NUMBER
USER TEL NUMBER
OTHER FAX NUMBERS
6. PROG 1-TOUCH KEY
1. PRINT REPORT
2. REPORT
3. SENDER NAME
4. SUBADDRESS
See the Sending Guide.
For the LASER CLASS 710, the installation of the optional Network
Kit III is necessary to access these items.
The TX terminal ID will be included in the document that is scanned
and sent by I-Fax.
Terminal ID appears outside the image border of the document.
Terminal ID appears inside the image border of the document.
You can prefix your e-mail address with the abbreviation FAX or TEL
in your sender ID.
Prefixes the e-mail address with the abbreviation 'FAX'.
Prefixes the e-mail address with the abbreviation 'TEL'.
The TX terminal ID will not be included in the document that is
scanned and sent by I-Fax.
Sets the telephone number to be printed as the TX Terminal ID on
top of the document the other party receives.
The user’s telephone number is registered as the sender’s fax
number.
You can specify the number you want to use as the sender’s fax
number.
Designate a one-touch speed dialing key (1-72) to perform one of
the following functions. (See “Setting Up the Program One-Touch
Key,” on p. 10-15.)
Press the one-touch speed dialing key under which you register the
Print Report function whenever you need a transmission report for a
document you are sending.
If you select this setting, you do not have to open all three of the
one-touch speed dialing panels to start printing a report. Whenever
you need to print a report, press the one-touch speed dialing key set
for this feature.
Set a one-touch speed dialing key to function as [TTI Selector].
Whenever you want to select a sender’s name when sending a
document, press the one-touch speed dialing key set for this feature.
Set a one-touch speed dialing key to function as [Subaddress].
Whenever you want to enter a subaddress, press the one-touch
speed dialing key set for this feature.