Dell C2665dnf Color Laser Printer User Manual
Page 239
Auto Redial Setup
Purpose:
To configure settings for automatic redial.
Values:
Redial Attempts
3
*
Sets the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the printer
will not redial. The value is set in increments of 1.
Interval of Redial
Available Range: 0-13
1 minute
*
Sets the interval between redial attempts. The value is set
in increments of 1 minute.
Resend Delay
Available Range: 1-15 minutes
8 seconds
*
Sets the interval between re-send attempts. The value is set
in increments of 1 second.
Available Range: 3-255 seconds
Tone / Pulse
Purpose:
To select the dialing type.
Values:
Tone
*
Uses tone dialing.
Pulse(10PPS)
Sets "DP (10PPS)" (Dial Pulse, 10 Pulse Per Second) as the dial type.
Pulse(20PPS)
Sets "DP (20PPS)" (Dial Pulse, 20 Pulse Per Second) as the dial type.
Prefix Dial
Purpose:
To select whether to set a prefix dial number.
Values:
Off
*
Does not set a prefix dial number.
On
Sets a prefix dial number.
Prefix Dial Number
Sets a prefix dial number of up to five digits. This number dials before any
auto dial number is started. It is useful for accessing the Private Automatic
Branch Exchange (PABX).
Fax Cover Page
Purpose:
To set whether to attach a cover page to faxes.
Values:
Off
*
Does not attach a cover page to faxes.
On
Attaches a cover page to faxes.
Understanding the Printer Menus
237