beautypg.com

Dell C2665dnf Color Laser Printer User Manual

Page 236

background image

Incoming Defaults

Purpose:
To configure settings for incoming fax.

Receive Mode

Purpose:
To select the default fax receiving mode.
Values:

Telephone

Automatic fax reception is turned off. You can receive a fax by picking up the handset of the external

telephone and then pressing the remote receive code, or by tapping

Manual Receive

in

On

Hook

and then tapping

Receive

. For details about

Manual Receive

, see "Receiving a Fax

Manually in the Telephone Mode."

Fax

*

Automatically receives faxes.

Telephone / Fax

When the printer receives an incoming fax, the external telephone rings for the time specified in

Auto Receive Tel/Fax

, and then the printer automatically receives a fax. If an incoming call

is not a fax, the printer beeps from the internal speaker indicating that the call is a telephone call.

Ans Machine/Fax

The printer can share a telephone line with an answering machine. In this mode, the printer will

monitor the fax signal and pick up the line if there are fax tones. If the phone communication in your

country is serial, this mode is not supported.

DRPD

Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive ring service must be

installed on your telephone line by the telephone company. After the telephone company has provided

a separate number for faxing with a distinctive ring pattern, configure the fax setup to monitor for

that specific ring pattern.

Ring Tone Volume

Purpose:
To set the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal

speaker when Receive Mode is set to Telephone/Fax.
Values:

Off

Turns off the volume of the ring tone.

Low

Sets the volume of the ring tone to Low.

Medium

Sets the volume of the ring tone to Medium.

High

*

Sets the volume of the ring tone to High.

Auto Receive Setup

Purpose:
To configure settings for automatic fax reception.
Values:

Auto Receive Fax

0 seconds

*

Sets the interval at which the printer goes into the fax

receive mode after receiving an incoming call. The value is

set in increments of 1 second.

Available Range: 0-255 seconds

Understanding the Printer Menus

234