Dell C2665dnf Color Laser Printer - Manual (Page 195)

Printer Maintenance
The Printer Maintenance tab includes the System Settings - General, System Settings - Timers, System Settings -
Output Settings, Service Tools, Tray Management, Panel Language, TCP/IP Settings, Network Settings, Copy
Defaults, Scan Defaults, Fax Defaults, USB Direct Print Defaults, and Fax Settings pages.
System Settings - General
Purpose:
To configure the power management of the printer, date and time, mm/inch setting, alarm tones, job log auto print,
and setting of the additional memory.
Values:
Power Saver Timer Sleep *1
Deep Sleep *1
Available Range:
1–30 minutes
Available Range:
1–30 minutes
Sets the amount of transition time to the Sleep mode
after the printer finishes a job.
Sets the amount of transition time between the Sleep
mode and the Deep Sleep mode.
Date & Time Time Zone
Settings
Click to display the Time Zone Settings dialog box. Select
the geographic region and time zone, and then click OK.
Time Zone Displays the time zone selected on the Time Zone
Settings dialog box.
Set Date Sets the date.
Date Format Sets the date format.
Set Time Sets the time. You can select AM or PM when Time
Format is set to 12 Hour.
Time Format Sets the time format in 24 Hour or 12 Hour.
mm / inch Millimeters(mm)
Inches(") Selects millimeter or inch as the default measurement
unit.
Audio Tone Control Panel
Tone
Off Does not emit a tone when the operator panel input is
correct.
Soft
Normal Emits a tone at the specified volume when the operator
panel input is correct.
Loud
Invalid Key Tone Off Does not emit a tone when the operator panel input is
incorrect.
Soft
Normal Emits a tone at the specified volume when the operator
panel input is incorrect.
Loud
Machine Ready
Tone
Off Does not emit a tone when the printer becomes ready.
Soft Emits a tone at the specified volume when the printer
becomes ready.
Normal
Loud
Understanding the Tool Box Menus 193