beautypg.com

Ipsec – Dell C2665dnf Color Laser Printer User Manual

Page 176

background image

Certificate Details

*2

Category

Displays the device to certificate selected at the Certificate Management

page or SSL/TLS page.

Issued To

Displays the device to certificate.

Issuer

Displays the issuer to certificate.

Serial Number

Displays the serial number of the device.

Public Key Method

Displays the public key method.

Size of Public Key

Displays the size of public key.

Valid From

Displays the time the certificate is valid.

Valid Until

Displays the time the certificate is invalid.

Status

Displays whether certificate is valid or not.

Certificate Purpose

Displays the purpose of certificate.

Certificate Selection

Displays the type of device certificate you selected.

Status
E-mail Address

Displayed only when an e-mail address is specified in the certificate.

Use this certificate

Click to apply this certificate to the device.

Delete

Click to delete this certificate.

Export This Certificate Click to export the certificate to the other device.

*1

This item is available only when the self-signed certificate has been generated.

*2

This item is effective only when connected via SSL/TLS (https). Only the administrator is allowed to display the pages.

IPsec

Purpose:
To specify the Security Architecture settings for Internet Protocol (IPsec) for encrypted communication to the

printer.
Values:

IPsec Settings

Protocol

Select the check box to enable the protocol.

Pre-Shared Key

Sets a shared key. Up to 255 alphanumeric characters, periods, and

hyphens can be used.

Re-enter Pre-Shared Key Enters the shared key again to confirm it.
Device Certificate

Displays the device certificate.

IKE SA Lifetime

Sets the lifetime for IKE SA from 5 to 28,800 minutes.

IPsec SA Lifetime

Sets the lifetime for IPsec SA from 5 to 2,880 minutes.

DH Group

Sets the DH group.

PFS

Select the check box to enable the PFS setting.

Remote peers IPv4 address Sets the IP address to connect to.
Remote peers IPv6 address Sets the IP address to connect to.
Non IPsec communication Allows communication with a device which does not support IPsec.

policy

NOTE:

If IPsec is enabled with incorrect settings, you must disable it using the IPsec menu on the operator panel.

Dell™ Printer Configuration Web Tool

174