Dell C2665dnf Color Laser Printer - Manual (Page 224)

Default Color
Purpose:
To specify the color mode to Color or Black. This setting is used for a print job that does not specify a print mode.
Values:
Black * Prints in the black and white mode.
Color Prints in the color mode.
Ignore Form Feed
Purpose:
To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
Off * Disables the Ignore Form Feed feature.
On Enables the Ignore Form Feed feature.
PS
Use the PS menu to change printer settings that only affect jobs using the PostScript Level3 Compatible emulation
printer language.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
PS Error Report
Purpose:
To specify whether the contents of the errors concerning PostScript Level3 Compatible page description language
are printed.
The change becomes effective after the printer is turned off and then on again.
Values:
Off Discards the print job without printing an error message.
On * Prints an error message before it discards the job.
NOTE: Instructions from the PS driver override the settings specified on the operator panel.
PS Job Time-out
Purpose:
To specify the execution time for one PostScript Level3 Compatible job. The change becomes effective after the
printer is turned off and then on again.
Values:
Off * Job time-out does not occur.
On 1 minute * An error concerning the PostScript Level3 Compatible page
Available Range: 1-900 minutes
description language occurs if processing is not completed after the
specified time.
Understanding the Printer Menus 222