Dell C2665dnf Color Laser Printer - Manual (Page 193)

Margin Left / Right Displays the value of the left and right margins.
Margin Middle Displays the value of the middle margin.
TIFF File Format Displays the TIFF file format; TIFF V6 or TTN2.
Image Compression Displays the image compression level.
Max E-mail Size Displays the maximum size of e-mail that can be sent.
File Name Displays the mode used to name scanned documents.
Create Folder Displays the folder to which scanned documents are to be saved.
Fax Defaults Resolution Displays the resolution level to be used for fax transmission.
2 Sided Scanning Displays whether to scan both sides of a document.
Darken / Lighten Displays the density level to be used for fax transmission.
Delayed Send Displays the fax transmission start time.
USB Direct Print Output Color Displays the default color mode.
Defaults
Select Tray Displays the default tray.
2 Sided Printing Displays whether to print on both sides of a sheet of paper.
Layout Displays the default paper layout when Layout is selected.
Collation Displays whether to sort the print job.
Image Types Displays the mode used to set the print image quality of documents.
Fax Settings
Purpose:
To display the fax settings of the printer.
Values:
Fax Number Displays the fax number of the printer, which will be printed on the header of
faxes.
Country Displays the country where the printer is used.
Fax Header Name Displays the name of the sender that will be printed on the header of faxes.
Line Type Displays the line type; PSTN or PBX.
Line Monitor Displays the volume of the line monitor, which audibly monitors a transmission
through the internal speaker until a connection is made.
DRPD Pattern Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Receive Mode Displays the fax receiving mode.
Ring Tone Volume Displays the volume of the ring tone, which indicates that an incoming call is a
telephone call through the internal speaker when Receive Mode is set to
Telephone / Fax.
Auto Receive Fax Displays the interval at which the printer goes into the fax receive mode after
receiving an incoming call.
Auto Receive Tel/Fax Displays the interval at which the printer goes into the fax receive mode after the
external telephone receives an incoming call.
Auto Receive Ans/Fax Displays the interval at which the printer goes into the fax mode after the external
answering machine receives an incoming call.
Junk Fax Setup Displays whether to reject faxes sent from unwanted stations.
Sent Fax Forward Displays whether to forward incoming faxes to a specified destination.
Understanding the Tool Box Menus 191