Dell C2665dnf Color Laser Printer - Manual (Page 203)

Panel Language
Purpose:
To determine the language of the text on the touch panel.
Values:
Panel Language English Sets the language to be used on the touch panel.
French
Italian
German
Spanish
Danish
Dutch
Norwegian
Swedish
Apply New Settings After you change the settings, click this button to apply the changes.
Restart printer to apply new settings Click this button to apply the changes.
TCP/IP Settings
NOTE: TCP/IP Settings is not available when IP Mode of the printer is set to IPv6 Mode .
Purpose:
To configure TCP/IP settings.
Values:
IP Address Mode AutoIP Automatically sets the IP address.
A random value in the range of 169.254.1.0 to 169.254.254.255 that is not
currently in use on the network is set as the IP address. The subnet mask is set as
255.255.0.0.
BOOTP Sets the IP address using BOOTP.
RARP Sets the IP address using RARP.
DHCP Sets the IP address using DHCP.
Panel Manually sets the IP address.
IP Address Manually sets the IP address allocated to the printer.
It is allocated to the printer using the format nnn.nnn.nnn.nnn. Each octet that
makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in
the range of 224 to 254 cannot be specified for the first octet of a gateway address.
Subnet Mask Manually sets the subnet mask.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 255. 255.255.255.255 cannot be
specified as the subnet mask.
Gateway Address Manually sets the gateway address.
It is specified using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range
of 224 to 254 cannot be specified for the first octet of a gateway address.
Apply New Settings After you change the settings, click this button to apply the changes.
Understanding the Tool Box Menus 201