Dell C2665dnf Color Laser Printer - Manual (Page 230)

Gateway Address When an IP address is being set manually, the gateway address is specified
using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the
range of 224 to 254 cannot be specified for the first octet of a gateway
address.
IPsec
NOTE: IPsec feature is available only when IPsec is enabled on the Dell Printer Configuration Web Tool.
Purpose:
Disables IPsec.
Reset Wireless
NOTE: Reset Wireless feature is available only when the printer is connected using the wireless network.
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network
settings are reset to their default values.
Connection Speed
NOTE: Connection Speed feature is available only when the printer is connected using the wired network.
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the
printer is turned off and then on again.
Values:
Auto * Detects the Ethernet settings automatically.
10BASE-T Half Uses 10BASE-T Half-duplex.
10BASE-T Full Uses 10BASE-T Full-duplex.
100BASE-TX Half Uses 100BASE-TX Half-duplex.
100BASE-TX Full Uses 100BASE-TX Full-duplex.
1000BASE-T Full Uses 1000BASE-T Full-duplex.
Wi-Fi Direct
NOTE: When the optional wireless adapter is attached and the Ethernet cable is disconnected, Wi-Fi Direct is displayed.
Purpose:
To configure the Wi-Fi Direct network settings.
Values:
Wi-Fi Direct Disable * Disables the Wi-Fi Direct network.
Enable Enables the Wi-Fi Direct network.
Group Role Auto Automatically resolves the group role for Wi-Fi Direct.
Group Owner * Sets the printer as the Group Owner when using Wi-Fi Direct. Setting the
printer to become the group owner makes it possible for devices to discover
this printer. The SSID of the printer will be then displayed in the list of
wireless networks on your Wi-Fi mobile device.
Understanding the Printer Menus 228