Dell C2665dnf Color Laser Printer - Manual (Page 206)

Yellow Medium Available Range: Sets the color balance level of medium density yellow.
Density -3 to +3
Yellow High Density Available Range: Sets the color balance level of high density yellow.
-3 to +3
Magenta Low Available Range: Sets the color balance level of low density magenta.
Density -3 to +3
Magenta Medium Available Range: Sets the color balance level of medium density
Density -3 to +3 magenta.
Magenta High Available Range: Sets the color balance level of high density magenta.
Density -3 to +3
Cyan Low Density Available Range: Sets the color balance level of low density cyan.
-3 to +3
Cyan Medium Available Range: Sets the color balance level of medium density cyan.
Density -3 to +3
Cyan High Density Available Range: Sets the color balance level of high density cyan.
-3 to +3
Black Low Density Available Range: Sets the color balance level of low density black.
-3 to +3
Black Medium Available Range: Sets the color balance level of medium density black.
Density -3 to +3
Black High Density Available Range: Sets the color balance level of high density black.
-3 to +3
2 Sided Copying 1 -> 1 Sided Prints on one side of a sheet of paper.
1 -> 2 Sided Prints one sided originals on both sides of a sheet of
paper.
2 -> 1 Sided Prints two sided originals on one side of a sheet of
paper.
2 -> 2 Sided Prints two sided originals on both sides of a sheet of
paper.
Binding of Output *2 Long Edge Binding Prints on both sides of a sheet of paper to be bound by
long edge.
Short Edge Binding Prints on both sides of a sheet of paper to be bound by
short edge.
Binding of
Original *3
Long Edge Binding
Short Edge Binding Scans both sides of a document bound by long edge.
Scans both sides of a document bound by short edge.
2-Up Off Does not perform multiple-up printing.
Auto Automatically reduces the original pages to fit onto one
sheet of paper.
Manual Prints the original pages onto one sheet of paper in the
size specified in Reduce / Enlarge.
Margin Top / Bottom Available Range: 0–50 mm (0.0–2.0 inches) Sets the value of the top and bottom margins.
Margin Left / Right Available Range: 0–50 mm (0.0–2.0 inches) Sets the value of the left and right margins.
Margin Middle Available Range: 0–50 mm (0.0–2.0 inches) Sets the value of the middle margin.
Apply New Settings After you change the settings, click this button to apply
the changes.
Restart printer to apply new settings Click this button to restart the printer and apply the
changes.
Understanding the Tool Box Menus 204