Setting the features, Setting the ssl-use server certificate (http/ipp) – Dell C2665dnf Color Laser Printer User Manual
Page 439
Setting the Features
You can set various security features using digital certificates.
See the following for details:
• "Setting the Certificate in the IPsec Digital Signature Mode"
• "Setting the SSL-use Server Certificate (HTTP/IPP)"
• "Setting LDAP-SSL/TLS Communication"
• "Setting Server Certificate Verification for LDAP-SSL/TLS Communication"
• "Setting Client Certificate for LDAP-SSL/TLS Communication"
• "Setting for Wireless LAN WPA-Enterprise (EAP-TLS)"
• "Setting for Wireless LAN WPA-Enterprise (PEAPV0-MS-CHAPV2, EAP-TTLS PAP, EAP-TTLS CHAP)"
• "Setting Client Certificate for IEEE 802.1x (EAP-TLS)"
Setting the Certificate in the IPsec Digital Signature Mode
NOTE:
To manage digital certificates, you must set up HTTPS communication. For details, see "Preparing to Manage
1 Import the certificate to be used with IPsec. For more information, see "Importing a Digital Certificate."
2 Set the certificate to be used with IPsec. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly in IPsec. For more information, see "Confirming the Settings of a
4 Select Print Server Settings from the left side of the page.
5 Click the Security tab.
6 Select IPsec.
7 Select the Enable check box for Protocol.
8 Select Digital Signature from the IKE list.
9 Set each item, as necessary.
10 Click Apply New Settings.
11 After restarting the printer, IPsec communication using digital signatures is enabled. You can execute IPsec
communication (Digital Signature Mode) between the printer and the network device (such as PC) on which the
certificate and IPsec are set identically as on this device.
Setting the SSL-use Server Certificate (HTTP/IPP)
NOTE:
To manage digital certificates, you must set up HTTPS communication. For details, see "Preparing to Manage
1 Import the certificate to be used with the SSL-use server. For more information, see "Importing a Digital
2 Set the certificate to be used with the SSL-use server. For more information, see "Setting a Digital Certificate."
3 Confirm whether the certificate is set correctly. For more information, see "Confirming the Settings of a Digital
NOTE:
Confirm whether the newly set certificate, not the self-signed certificate, is associated.
4 After restarting the printer, the certificate set as described above is used as the server certificate when executing
communication with HTTP/IPP-SSL/TLS.
Using Digital Certificates
437