Dell C2665dnf Color Laser Printer - Manual (Page 242)

Power Saver Timer
Purpose:
To specify the time for transition to power saver mode.
Values:
Sleep 10 minutes * Specifies the time taken by the printer to enter Sleep mode after it
Available Range: 1–30 minutes finishes a job.
Deep Sleep 20 minutes * Specifies the time taken by the printer to enter Deep Sleep mode after it
Available Range: 1–30 minutes has entered Sleep mode.
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 30 minutes for power saver mode if you want a balance between energy consumption
and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing any
button on the operator panel.
Date & Time
Purpose:
To specify the date and time formats.
Values:
Time Zone Sets the time zone.
Date Sets the date depending on the Format settings.
Format Sets the date format.
Time Sets the time.
Format 12 Hour Sets the time in 12-hour format.
24 Hour Sets the time in 24-hour format.
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters(mm) * Selects millimeter as the default measurement unit.
Inches(") Selects inch as the default measurement unit.
NOTE: The default for mm/inch varies depending on other settings, such as Country and Document Size .
Understanding the Printer Menus 240