Dell C2665dnf Color Laser Printer - Manual (Page 189)

Alert Tone Displays the volume of the tone that is emitted when a
problem occurs. Off indicates that the tone is disabled.
Out of Paper Alert Tone Displays the volume of the tone that is emitted when the
printer runs out of paper. Off indicates that the tone is
disabled.
Low Toner Alert Tone Displays the volume of the tone that is emitted when the
toner is low. Off indicates that the tone is disabled.
Auto Clear Alert Tone Displays the volume of the tone that is emitted 5 seconds
before the printer performs auto clear. Off indicates that
the tone is disabled.
NFC Authentication Tone Displays the volume of the tone that is emitted when an
NFC card is placed on the NFC reader for authentication.
Off indicates that the tone is disabled.
System Settings - Auto Reset Displays the amount of time before the printer
Timers automatically resets the settings on the operator panel to
the defaults when no additional settings are made.
Fault Time-out Displays the amount of time the printer waits before
canceling a job that stops abnormally.
Job Time-out Displays the amount of time the printer waits for data to
arrive from the computer.
System Settings - Default Paper Size Displays the default paper size.
Output Settings
Print ID Displays where to print a user ID on the output paper.
Print Text Displays whether the printer outputs PDL (Page
Description Language) data (which is not supported by
the printer) as text when the printer receives it.
Banner Sheet Insert Position Displays where to insert the banner sheet.
Banner Sheet Specify Tray Displays the banner sheet tray.
Substitute Tray Displays an indication to use paper of a different size
when the paper that is loaded in the specified tray does
not match the paper size settings for the current job.
Letterhead 2 Sided Displays whether to print on both sides of a sheet of
letterhead paper.
Enable A4<>Letter Switch Displays whether to print A4 size jobs on Letter size paper
if A4 is not available in the paper trays and vice versa
(Letter size job on A4 size paper).
Report 2 Sided Print Displays whether to print reports on both sides of a sheet
of paper.
Use Another Tray Displays whether to show a message to select another tray
when the specified paper is not available in the paper tray.
Service Tools - Paper Plain Displays the plain paper density settings.
Density
Label Displays the label paper density settings.
Service Tools - Auto Auto Registration Adjustment Displays whether to automatically adjust color
Registration Adjustment registration.
Service Tools - Non-Dell Non-Dell Toner Displays whether to use toner cartridge of another
Toner manufacturer.
Service Tools - Adjust Adjust Altitude Displays the altitude of the location where the printer is
Altitude installed.
Understanding the Tool Box Menus 187