Canon REALiS X600 - Manual (Page 145)

User Command Specifications 9．Details of command RANGE ASPECT
1 RANGE ASPECT
RANGE ASPECT
RANGE□ASPECT
r:ASPECT=I, , , …,
-1
A "busy" response is given while the zoom or focus lens is being driven.
With some input signals, it may not be possible to make this inquiry.
-2
> RANGE ASPECT
< r:ASPECT=I, AUTO, NORMAL, WIDE
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
Mode Control Setting
X600
○ ○ ○
SX60
SX6 ○ ○ ○ ○ ○ Ч ○ ○
– ○ ○ Ч SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
○ ○ ○ ○
01.01**
Example
Description
Response
01.01** 01.00** 01.01**
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The screen settings can be selected by the ASPECT command.
Commands
Function
Format
Screen setting option request
Reference
○ ○ ○ –
ID
SX60 X600 SX50 SX6
This inquires about the parameter options which enable the screen to be set.
PAGE 137