Canon REALiS X600 - Manual (Page 6)

User Command Specifications 1. Overview
1 1. Overview
・ These specifications describe the methods of controlling the projector from the PC over an RS-232C connection
・ Virtually all operations possible with the remote control can be controlled from the PC
・ The following symbols are used in these specifications.
[ ]
|
：＝
1. Overview
Symbol
△
□
▽
The definition name is on the left side of this mark, and the definition description is on the right side.
Description
Same as OR
Space with ０ or more characters (20h), Tab (09h), or other separator
Space with 1 or more characters (20h), Tab (09h), or other separator
Separator between parameters △ , △ | □
The data in [ ] can be omitted.
PAGE 1