Canon REALiS X600 - Manual (Page 49)

User Command Specifications ９．Details of command RGBOFFSET
1 RGBOFFSET
RGBOFFSET
RGB offset settings (-20 to 20 for each value)
The RANGE command can be used to obtain the parameter range that can be set at that time.
For details, refer to the
RANGE command .
For all other responses, refer to "Error List."
This command is used to adjust the offset of the R, G and B colors.
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2)
(3)
(4)
For details, refer to the GET command .
Setting
> RGBOFFSET=10, 11, 12 The R offset is set to 10, G offset to 11 and B offset to 12.
< i:OK
Reference
> GET RGBOFFSET or ?RGBOFFSET The RGB offset values are obtained.
< g:RGBOFFSET=-10, 0, 19
Obtain settable parameter range (Min, Max)
> RANGE RGBOFFSET
< r:RGBOFFSET=N,-20,20,-20,20,-20,20
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
A number from -20 to 20 can be set for each color as the
RGB offset values.
Commands
supported
SX60 X600
０１．００** ０１．０１** ０１．０１** ０１．０１**
Example
This command functions in the same way as when "Image adjustments" - "Color adjustments" -
"Red/green/blue offset" are selected on the menu.
The current RGB offset values can be obtained using the GET command.
This sets the currently selected input signal and image mode.
RGB offset adjustment
"i:OK" is returned if the parameter was set properly.
Number
RGBOFFSET=▽▽setting：Number>
Control Setting Reference Mode
○ ○ ○
Commands
Function
Description
Response
Parameter
SX50 SX6
Model Power supply Input Mode
Remote Local
×
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 － － － － － － － － － － －
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
Format
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
X600
PAGE 41