Canon REALiS X600 - Manual (Page 90)

User Command Specifications 9．Details of command GET ASPECT
1 GET ASPECT
GET ASPECT
GET□ASPECT
?△ASPECT
g:ASPECT=：ＩＤ>
Auto
Normal
Wide
Full screen
Real
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
With some input signals, it may not be possible to make this inquiry.
-2 The screen settings can be selected by the ASPECT command.
> GET ASPECT or ? ASPECT
< g:ASPECT=TRUE
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
FULL ○ ○ ○ ○
ID ○ ○
–
○
– ○ –
○
NORMAL
AUTO
Errors supported by model
○ ○
X600 SX50 SX6 SX60
○
○ –
X600
○
Parameter
SX60
○ ○
Meaning
SX50 SX6
This inquires about the current screen setting.
WIDE
Screen setting inquiry
Reference Setting
Function
Format
Description
Response
○ ○ ○ ○
01.00** 01.01** 01.01** 01.01**
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ – ○ ○ ×
SX6 ○ ○ ○ ○ ○ × ○ ○ ○ ○ ○
SX60
X600
Example
○ TRUE ○ ○ ○
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
Commands
supported
Mode Control
PAGE 82