Canon REALiS X600 - Manual (Page 169)

User Command Specifications 9 .Details of command RANGE PMM
1 RANGE PMM
RANGE PMM
RANGE□PMM
r:PMM=I, , , ...,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE PMM
< r:PMM=I, OFF, STANDBY, EXIT
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
Function
Format
Example
Description
Response
Power management setting option request
This inquires about the parameter options which enable power management to be set.
ID
Mode Control
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○ ○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ × ○ ○ ○ ○
SX60
X600
○ ○ ○
○
Setting Reference
Commands
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Power management can be set by the PMM command.
PAGE 161