Canon REALiS X600 - Manual (Page 26)

User Command Specifications ９．Details of command BLANK
1 BLANK
BLANK
BLANK=
BLANK parameters
For details, refer to the RANGE command .
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command . ）
(2)
(3)
(4)
(5) The BLANK function is released in the following situations.
a. When the POWER button on the remote control or panel has been pressed
b. When power management standby countdown has started
c. When the mode has been switched from remote to local
d. Power Off
(6)
For details, refer to the GET command .
Setting
> BLANK=ON BLANK is set to ON.
< i:OK
Reference
> GET BLANK or ?BLANK The current BLANK status is referenced.
g:BLANK=ON
Acquisition of parameters which can be set
> RANGE BLANK
< r:BLANK=I, OFF, ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
OFF ON PM
Ч ○ Ч
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
Refer to the AUTOSETEXE command.
Commands
supported
ON BLANK ON
０１．０１**
The current BLANK settings can be obtained using the GET command.
Commands
Function
Parameter
Description
Format
Example
"i:OK" is returned if the parameter was set properly.
This command is used to set the BLANK function.
Response
This command functions only when the projector is in the "remote mode ." It cannot be executed
by a menu operation or button operation.
Only a black screen is displayed.
No input signals and none of the on-screen displays appear while BLANK is underway.
The “display setting,” "image adjustment" and other commands can be executed even while BLANK
is underway.
However, the “AUTOSETEXE=FOCUS” and “AUTOSETEXE=SCRN” commands cannot be executed.
Mode
ＩＤ
Parameter Meaning
Control Setting Reference
BLANK function
OFF BLANK OFF
○ ○ ○
SX50 SX6 SX60 X600
０１．００** ０１．０１** ０１．０１**
Model Power supply Input Mode
Remote Local
×
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
－ － SX50 －
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
PAGE 18