Canon REALiS X600 - Manual (Page 150)

User Command Specifications 9．Details of command RANGE GAMMA
1 RANGE GAMMA
RANGE GAMMA
RANGE□GAMMA
r:GAMMA=N, ,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE GAMMA
< r:GAMMA=N, -4, 4
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The gamma adjustment value can be set by the GAMMA command.
Commands
supported
SX60 X600 SX50 SX6
Control Setting Reference
For all other responses, refer to "Error List."
Gamma adjustment range request
Number
Mode
○ ○ ○ –
○ ○
Commands
Function
Format
Example
Description
Response
This inquires about the range within which the gamma can be adjusted.
01.00** 01.01** 01.01** 01.01**
Model Power Input Mode
Remote Local
○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ – ○ ○ ×
SX6 ○ ○ ○ × ○ ○ ○ ○ ○ ○ ○
SX60
X600
PAGE 142