Canon REALiS X600 - Manual (Page 175)

User Command Specifications 9．Details of command RANGE TERMINAL
1 RANGE TERMINAL
RANGE TERMINAL
RANGE□TERMINAL
r:TERMINAL=I, , , …,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE TERMINAL
< r:TERMINAL=I, IN, OUT
* Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'TERMINAL_OUT' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
Setting Reference
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
This inquires about the parameter options which enable the terminal to be set.
ID
(Refer to the ZCONTDRV command and FCONTDRV command.)
The terminal can be set by the TERMINAL command.
SX6
– – – – – – – – – – – –
SX6
– – – SX60
X600
– ○ ○ Ч
○ Ч
OUT ○ ○ Ч Ч ○ ○ –
○ – – ○
None Remote Local
SX50
IN ○ ○ ○ ○ ○
×
Mode
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART
Model Parameter Input
×
Power
○
SX50
Terminal setting option request
Mode Control
SX60 X600
Commands
Example
Description
Response
Function
Format
01.00** 01.01**
×
01.01** 01.01**
PAGE 167