beautypg.com

Fstepdrv, Range command, Error list – Canon REALiS X600 User Manual

Page 75: Zcontdrv command and fcontdrv command

background image

User Command Specifications

9.Details of command FSTEPDRV

1

FSTEPDRV

FSTEPDRV

FSTEPDRV=

Focus lens step control parameters

For details, refer to the

RANGE command

.

For all other responses, refer to

"Error List."

This command is used to drive the focus lens.

(1)

However, a "busy" response is given while the zoom or focus lens is being driven.

( Refer to the

ZCONTDRV command and FCONTDRV command.

(2)

(3)
(4) If a focusing error occurs, step drive cannot be controlled.

Control

> FSTEPDRV=NEAR
< I:OK

Range acquisition

> RANGE FSTEPDRV
< r:FSTEPDRV=I, FAR, NEAR

"FAR" or "NEAR" can be set for focus step control.

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

OFF

ON

PM

Ч

Ч

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

1-step control is exercised over the zoom toward the
NEAR end.

Commands

supported

Meaning
This initiates focusing toward the far end.
This initiates focusing toward the near end.

The parameters which can be set at any given point in time can be obtained using the
RANGE command.

Example

This command functions in the same way as when first the "FOCUS" button on the remote control
or main unit panel is pressed and then the "←" or "→" button is pressed.
The amount by which the lens is focused is constant, and it is fixed for the system.

It can be executed when the projector is in both the remote mode and power-on status at the same
time.

Commands

Function

Parameter

Description

Response

Format

Focus lens step drive control

"i:OK" is returned when zooming was completed successfully after step drive.

Control Setting

Reference

Mode

Parameter

NEAR

ID

FAR

01.00**

01.01**

01.01**

01.01**

SX50

SX6

SX60

X600

Model Power supply

Input

Mode

Remote

Local

×

Remarks

D-RGB A-RGB1 A-RGB2

Comp

Video

S-Video D-Video SCART

None

SX50

SX6

×

SX60
X600

PAGE 67

This manual is related to the following products: