Canon REALiS X600 - Manual (Page 124)

User Command Specifications ９．Details of command GET DPON
1 GET DPON
GET DPON
GET□DPON
?△DPON
g:DPON=
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) Direct power-on can be set using the DPON command .
> GET DPON or ? DPON
< g:DPON=OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
ー ー ー
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
ON
ＩＤ
OFF
Meaning
This sets direct power-on to ON.
This sets direct power-on to OFF.
For all other responses, refer to "Error List."
Description
Response
Commands
Function
Format
This command is used to inquire about the current direct power-on setting.
Control Mode Reference
Direct power-on setting inquiry
Setting
Setting
SX60 X600
０１．００** ０１．０１** ０１．０１** ０１．０１**
SX50 SX6
× ○ ○ ○
Model Power supply Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ー ー ー ー ー ー - - ー ー ー
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
X600
PAGE 116