Canon REALiS X600 - Manual (Page 147)

User Command Specifications 9．Details of command RANGE BRI
1 RANGE BRI
RANGE BRI
RANGE□BRI
r:BRI=N, ,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE BRI
< r:BRI=N, -20, 20
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The brightness can be set by the BRI command.
X600
× ○ ○ ○ ○ ○ ○ ○ SX6 ○ ○ ○
SX60
○ × SX50 ○ ○ ○ – ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
○ ○ ○ ○
01.01**
Brightness setting range request
Mode Control Setting Reference Commands
Function
Format
Example
Description
Response
Number
○ ○ ○ –
This inquires about the range of values at which the brightness can be set.
01.00** 01.01** 01.01**
SX60 X600 SX50 SX6
PAGE 139