Canon REALiS X600 - Manual (Page 176)

User Command Specifications 9．Details of command RANGE KEYLOCK
1 RANGE KEYLOCK
RANGE KEYLOCK
RANGE□KEYLOCK
r:KEYLOCK=I, , , …,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE KEYLOCK
< r:KEYLOCK=I, MAIN, RC
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Mode Control
This inquires about the parameter options which enable key lock to be set.
ID
For all other responses, refer to "Error List."
Setting Reference
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × ○ ○ ○ – SX50 ○ ○ ○
Remarks
S-Video D-Video SCART None Video
Mode
Remote Local
○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp
01.00** 01.01** 01.01** 01.01**
○ ○ ○
Example
SX50 SX6 SX60 Commands
supported
X600
(Refer to the ZCONTDRV command and FCONTDRV command.)
Key lock can be set by the KEYLOCK command.
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
Commands
Function
Format
Key lock setting option request
Description
Response
PAGE 168