Canon REALiS X600 - Manual (Page 51)

User Command Specifications ９．Details of command MEMCADJ
1 MEMCADJ
MEMCADJ
MEMCADJ=
Memory color adjustment parameters
For details, refer to the RANGE command .
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2)
(3)
(4)
For details, refer to the GET command .
Control
> MEMCADJ=MEM_M
< i:OK
Reference
> GET MEMCADJ or ?MEMCADJ The memory color adjustment level is obtained.
< g:MEMCADJ=MEM_M
Acquisition of parameters which can be set
> RANGE MEMCADJ
< r:MEMCADJ=I,OFF,MEM_L,MEM_M,MEM_H
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:0002 INVALID_COMMAND" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
supported
Meaning
No adjustment
Low memory color adjustment
Medium memory color adjustment
This command is used to select no adjustment (OFF), low (MEM_L), medium (MEM_M) or high (MEM_H) as
the memory color adjustment setting.
It can be executed when the projector is in both the remote mode and power-on status at the same
time.
The current memory color adjustment setting can be obtained using the GET command.
○ ○ ○
Control
MEM_L
OFF
MEM_M
High memory color adjustment
The parameters which can be set at any given point in time can be obtained using the
RANGE command.
Setting
０１．００** ０１．０１** ０１．０１** ０１．０１**
Parameter
MEM_H
Reference Mode
Example
ID
Memory color adjustment
"i:OK" is returned if the parameter was set properly.
This command functions in the same way as when "Image adjustments" - "Memory color
adjustment" are selected on the menu.
This sets the currently selected input signal and image mode.
Commands
Function
Parameter
Description
Response
Format
SX50 SX6 SX60 X600
The color adjustment is set to “Medium memory color
adjustment”.
No adjustment (OFF), low (MEM_L), medium (MEM_M)
or high (MEM_H) can be set for the memory color
adjustment.
Model Power supply Input Mode
Remote Local None
×
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART
SX50 － － － － － － － － － － －
SX6 ○ ○ ○ ○ ○ × ○ ○ ○ ○
SX60
X600
○
PAGE 43