Canon REALiS X600 - Manual (Page 172)

User Command Specifications ９．Details of command RANGE NOSHOW
1 RANGE NOSHOW
RANGE NOSHOW
RANGE□NOSHOW
r:NOSHOW=I, , , …,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE NOSHOW
< r:NOSHOW=I, BLACK, BLUE, LOGO
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The current display screen when nothing is shown can be set by the NOSHOW command.
Commands
supported
Example
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ ×
SCART None
SX50 ○ ○ ○ ○ ○ ○ –
Mode
Remote Local
Remarks
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
○ ○ ○ ○
01.01** 01.01** 01.01**
Description
Response
For all other responses, refer to "Error List."
SX50 SX6 SX60 X600
01.00**
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
ID
Mode Control Setting Reference
This inquires about the parameter options which enable the display screen when nothing is shown to be
set.
Commands
Function
Format
Display screen when nothing is shown setting option request
PAGE 164