Canon REALiS X600 - Manual (Page 105)

User Command Specifications ９．Details of command GET MEMCADJ
1 GET MEMCADJ
GET MEMCADJ
GET□MEMCADJ
?△MEMCADJ
g:MEMCADJ=
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) The memory color adjustment can be set using the MEMCADJ command .
> GET MEMCADJ or ? MEMCADJ
< g:MEMCADJ=MEM_M
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
－ －
X600
SX60
○ × ○ ○ ○ ○ ○ ○ SX6 ○ ○ ○
－ －
Remote Local
SX50 － － － － － － －
SX6
This command is used to inquire about the current memory color adjustment setting.
ＩＤ
Mode
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video
Model Power supply Input
None S-Video D-Video SCART
Reference Commands
Function
Format
Setting Control Mode
Memory color adjustment setting inquiry
０１．０１**
Description
Response
Details of adjustment Meaning
X600 SX60 SX50
× ○ ○ ○
OFF No adjustment
MEM_L Low memory color adjustment
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
MEM_M Medium memory color adjustment
MEM_H High memory color adjustment
Example
０１．００** ０１．０１** ０１．０１**
PAGE 97