Canon REALiS X600 - Manual (Page 113)

User Command Specifications 9. Details of command GET IMAGEFLIP
1 GET IMAGEFLIP
GET IMAGEFLIP
GET□IMAGEFLIP
?△IMAGEFLIP
g:IMAGEFLIP=：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The flip display can be set using the IMAGEFLIP command.
> GET IMAGEFLIP or ? IMAGEFLIP
< g:IMAGEFLIP=REAR_CEILING
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
○ × ○ ○ ○ ○ ○ ○ SX6 ○ ○ ○
D-Video
○ × ○ ○ ○ – – ○
SCART A-RGB2 Comp Video S-Video
Remarks
SX50 ○ ○ ○
Model Power Input
D-RGB A-RGB1 None
Mode
Remote Local
○ ○ ○ ○
SX6 X600 SX60
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
01.00** 01.01** 01.01** 01.01**
SX50
Ceiling
Rear
Control
None
Setting
Setting Meaning
Mode
Remarks
Function
Format
Flip display setting inquiry
This inquires about the current flip display setting.
ID
REAR_CEILING Rear ceiling
REAR
NONE
CEILING
Commands
supported
Reference
Flip vertically
Flip horizontally
Example
Description
Response
Commands
Flip horizontally and vertically
PAGE 105