Canon REALiS X600 - Manual (Page 106)

User Command Specifications ９．Details of command GET 6AXADJ
1 GET 6AXADJ
GET 6AXADJ
GET□6AXADJ
?△6AXADJ
g:6AXADJ=
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) ON or OFF for the 6-axis adjustment can be set using the 6AXADJ command .
> GET 6AXADJ or ? 6AXADJ
< g:6AXADJ=ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
ON
Meaning
This sets the 6-axis adjustment to ON.
０１．０１** ０１．０１** ０１．０１**
× ○ ○ ○
6-axis adjustment ON/OFF inquiry
SX50
Reference
Setting
OFF
Setting Commands
Function
Format
Description
Response
Control Mode
Model Power supply Input
None S-Video D-Video SCART
Mode
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video Remote Local
SX50 － － － － － － － － － － －
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
This sets the 6-axis adjustment to OFF.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
SX6
This command is used to inquire whether the 6-axis adjustment is ON or OFF.
ＩＤ
SX60 X600
０１．００**
PAGE 98